by Austin Cliffe/ Creme DeMentia
Like many of you who are reading this, I spend a lot of time in thrift stores. I have come across some older toy pianos in my thrift store adventures. Toy pianos are actually pretty serious and widely used musical instruments. They have a very distinct sound and you’ll be surprised how often you will hear them used once you recognize their timbre. They are also somewhat valuable and sought after instruments, believe it or not.
When I bought these toy pianos, it was with the intent to install a piezo-electric pickup in them and resell them, since I had so many discs for making Bottle-Cap Contact Microphones. I was intrigued to see that Nick Heimer, who I had met at Bent Fest Minneapolis 2007, had a similar idea and brought the resulting devices with him to Circuitastrophe; his toy pianos were not only equipped with piezo pickups, but also had bent delay circuits bolted to them that would process the sounds coming from the pickup. They are very bizarre-sounding, beautiful instruments.

Adding the pickup and output to my toy piano was relatively easy. I found a good spot on the backboard to attach the pickup using a stethoscope, then glued the piezo disc in place with epoxy, finally covering it with a protective layer of Plasti-Dip. The piezo pickup runs directly to a 1/4″ mono jack, which I recessed into the back panel.
Initially the Toy Piano didn’t play quite right, I had to diagnose the problem after taking it apart. Toy pianos work similarly to regular pianos; instead of the hammers hitting strings, though, they hit corresponding tuned tines. The comb of tines is mounted directly to the back panel. The problem with my toy piano was that the back panel was installed crooked at the factory and not all the hammers were hitting their corresponding tines. I pulled out the factory-installed staples, fixed the alignment, and screwed the panel back on correctly. In fixing the alignment of the back panel, I had the idea to make it removable so that you could play the tines however you like when the panel was removed. I achieved this with hanger bolts and wing nut accompanied by a handle.
The idea of playing the insides of a piano is nothing new, and this project reminded me of two avant-garde composers of the 20th century, John Cage and Henry Cowell.
John Cage is probably a name you know; did you know he composed pieces for toy piano? He also composed a piece called “Cartridge Music,” where the performers would use phonograph cartridges to amplify objects. Piezo-electric discs are now often substituted for phonograph cartridges in performances of this piece; Cage’s score provides specific times for when the different objects are to be played, but the choice of objects is left open to the performers.
Henry Cowell you might not know. Henry Cowell developed a variety of experimental piano playing techniques in the early 1900s, one of which called for leaning inside the piano and manipulating the strings with bare hands to produce scrapes, howls and deep rumbles. He employs this technique in a piece called The Banshee. John Cage, like many other musicians, was inspired and influenced by Henry Cowell. Cage also experimented with the insides of the piano, by putting bolts, eraser bits and other things in between the piano’s strings. These inserted objects drastically changed the piano’s timbre and a normal piano could be prepared in this way by following his specific written instructions. Cage then wrote pieces for this new range of gamelan-like sounds coming from piano he had prepared. This process can be undone and causes no harm to the piano.
For your enjoyment, here are some videos of myself and some friends exploring the sound capabilities of this device paired with some effects pedals. The first video shows the piano being played normally, the second video shows the removable back being played. As was my initial intent, this instrument will be for sale on eBay shortly after this article has been posted, simply search “GetLoFi Toy Piano.”
Tags: Austin Cliffe, Contact Microphone, Creme DeMentia, Henry Cowell, Jaymar, John Cage, Nick Heimer, Pelzwik, phonograph cartridge, Piano, Pickup, Piezo Electric Disc, Piezo-electric, Piezoelectric, Toy
Nice Barbie Karaoke Machine strapped to the top of the piano! what is the little wedge of circuit board in the middle?
just like a little tiny wurlitzer….excellent article.
-sam
Just to be clear, Nick Heimer was the one who did the toy piano/Barbie Karaoke combo. I believe that tiny wedge is simply part of the BK circuit, but I’ll defer to Nick on that one.
[...] A piezo contact mic + jack provide a signal fit for effects/amplifying. After re-alligning the instrument’s tines, he also added a handle so the back panel could be removed and played like a thumb piano – get the deets over at GetLoFi. [...]
[...] A piezo contact mic + jack provide a signal fit for effects/amplifying. After re-alligning the instrument’s tines, he also added a handle so the back panel could be removed and played like a thumb piano – get the deets over at GetLoFi. [...]
I’m currently working on a large Barbie Karaoke project and have become pretty familiar with the innards of said beautiful baby. I don’t recognize the small board in the middle of the piano in question as being one of her internal organs. The only thing I could think it might be is the mixing board but it is neither the right shape nor wired to the main Barbie board in the right location to be such.
I just found the exact same toy piano at the thrift store a couple weeks ago, and am implementing the same methods! The one i found is in pretty bad shaped, a lot of warped wood needs replaced, but i’m hoping to get it up and running in the next couple weeks. Thanks for the post!
Ryan – If you locate the 1/4″ jack in the same corner that I did, be careful about placement, it’s a very tight fit.
This is the very early version of this piano that I did. The board on the middle is a bent kids drum machine. Since the barbie has two inputs the keys go into one and the bent drums go into the other. Makes for some wicked modulation between the two. I have recently added a bunch of different sized holes to the top and put led’s on the inside and bottom of it. It is much more athetic looking. It still has more work though. Glad y’alls like it. I have three of them I have done now. This one, a baby grand, and a mini one I found for free at the auctions in Iowa City.
i love these little plinkers. the effects in the videos are great, i always wondered what they would sound like wet
when i worked at shopgoodwill i made a demo video for the auction:
http://www.youtube.com/watch?v=NXOC_Ad8HlM
youtube: shopgoodwillevv jaymar piano should come up. it was in the box.
Hello, I have been working on a glockenspiels. i have 2 octaves already made of little metal pieces, tunned.
Excuse my english, i speak in spanish.
I want to know if you couild help sending me some fotos of the piano toy mechanism that activate the sound when you strike the keys, cause i was thinking to transform the glockenspiels into a piano toy, but i need some ideas.
Thank you very much.
Nicolás